Best washing machine service in Hyderabad
Top Load
Front Load
Semi Automatic
Leaking Water From The Drum
Accessive Vibration
Overfilling & UnderFilling
Water Drain Issue
Drain And Main Motor
PCB Faulty
Sensor Issue
OTHER WASHING MACHIN SERVICES
Helloo Bhaiaah Washing Machine Service: Your Trusted Partner for Expert Repairs in Hyderabad
Introduction:
In the bustling city of Hyderabad, a malfunctioning washing machine can disrupt your daily routine and create a laundry backlog. At Helloo Bhaiaah, we take immense pride in being your reliable solution for top-quality washing machine repair services that ensure your laundry remains hassle-free. Our team of experienced technicians is committed to providing comprehensive washing machine solutions, from repairs and maintenance to ensuring your clothes are clean and fresh.
Top Load
Service Includes
No Service Includes Present.
Service not included
No Service Not Includes Present.
Front Load
Service Includes
No Service Includes Present.
Service not included
No Service Not Includes Present.
Semi Automatic
Service Includes
No Service Includes Present.
Service not included
No Service Not Includes Present.
Leaking Water From The Drum
Service Includes
If water is leaking from the washing machine drum, it is usually an indication of a problem that needs to be addressed promptly. Here are some common causes of water leakage from the washing machine drum and possible solutions:
Damaged or Worn Out Door Seal/Gasket: The door seal, also known as the door gasket, is a rubber or silicone ring that prevents water from leaking out of the washing machine. If it's damaged, cracked, or worn out, it may cause leaks. Inspect the seal for any visible signs of damage and replace it if necessary.
Clogged Drain Filter/Pump: A clogged drain filter or pump can cause water to back up and leak from the drum. Check the drain filter located at the bottom front of the machine and clean it out. Also, ensure that the drain hose is not blocked or kinked.
Loose or Damaged Hose Connections: Examine all hose connections leading to and from the drum. If any of them are loose, damaged, or not properly secured, water may leak out during the wash cycle. Tighten or replace the hoses as needed.
Overloading the Washing Machine: Overloading the washing machine with too many clothes can cause water to spill over the drum's edges. Follow the manufacturer's guidelines for loading capacity to prevent this issue.
Unbalanced Load: An unbalanced load inside the drum can cause excessive vibrations during the spin cycle, leading to water leakage. Make sure to distribute the clothes evenly inside the drum to maintain balance.
Detergent Dispenser Issues: If the detergent dispenser is clogged or damaged, it can result in water overflowing and leaking from the drum. Clean or replace the detergent dispenser if needed.
Torn or Damaged Drum: In rare cases, a damaged or corroded drum can cause water to leak. If you suspect this is the issue, it's best to contact a professional technician to inspect and replace the drum if necessary.
Service not included
Services that are not typically included in the standard "Leaking water from the washing machine drum" service content may vary depending on the specific service provider or warranty coverage. However, some common exclusions could include:
Replacement Parts: If the service requires the replacement of certain parts like the door seal, drain pump, hoses, or other components, the cost of these parts might not be included in the service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the issue turns out to be unrelated to the leaking problem or if it's not covered under warranty.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the service for fixing the leak may not be covered, and the customer will have to bear the full cost of the repair.
Pre-existing Issues: If the service provider determines that the leaking issue is due to pre-existing damage or improper usage, the repair may not be covered under warranty or the standard service.
Emergency or After-Hours Service: If the service is required urgently or during non-business hours, there might be additional charges for emergency or after-hours services.
Cosmetic Damage: If the leaking has caused cosmetic damage to the washing machine, such as paint peeling or scratches, the repair for purely aesthetic issues might not be included.
User Error or Negligence: If the leaking is a result of user error, such as using the wrong type of detergent or overloading the machine, the repair may not be covered under warranty or the standard service.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the Technician service about any potential additional charges or exclusions before agreeing to the service.
Accessive Vibration
Service Includes
When an excessive amount of vibration occurs during the rotation of a washing machine, it can be indicative of an underlying issue that requires attention. Here's what a "Excessive Vibration During Rotation" service might typically include:
Inspection and Diagnosis: A qualified technician will inspect the washing machine to identify the cause of the excessive vibration. They will examine various components to pinpoint the problem accurately.
Leveling Check: The technician will check if the washing machine is level. Uneven leveling can cause vibration during rotation. They will adjust the leveling feet to ensure the machine is stable on the floor.
Load Balancing: The technician will advise the user on proper load distribution. Overloading or unevenly distributing clothes inside the drum can lead to imbalance and excessive vibration. They may provide guidance on loading techniques to minimize this issue.
Suspension Springs/Dampers Inspection: The technician will inspect the suspension springs or dampers that support the drum. Damaged or worn-out springs can lead to excessive movement during rotation, resulting in vibration. If necessary, they will replace faulty components.
Shock Absorbers Check: Some washing machines have shock absorbers to dampen vibrations. The technician will inspect these absorbers and replace them if needed.
Drum Bearings Examination: Worn-out drum bearings can cause increased vibration during rotation. The technician will assess the condition of the bearings and replace them if necessary.
Drive Belt Inspection: If the washing machine has a belt-driven system, the technician will examine the drive belt for signs of wear or damage. A loose or damaged belt can cause vibration issues and may require replacement.
Motor Examination: The technician will check the motor to ensure it is functioning correctly. Faulty motors can lead to imbalanced rotation and vibration problems.
Exterior and Interior Cleaning: During the service, the technician might clean the exterior of the washing machine and remove any dirt or debris from the drum and other internal components.
Test Run: After performing the necessary repairs or adjustments, the technician will conduct a test run to ensure that the excessive vibration issue has been resolved.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine and the service Technicians practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer.
Service not included
Services that are not typically included in the standard "An excessive amount of vibration occurs during rotation" service content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement Parts: If the service requires the replacement of certain parts like suspension springs, dampers, drum bearings, drive belts, or other components, the cost of these parts might not be included in the service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the excessive vibration is found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the excessive vibration issue may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the excessive vibration is a result of user error, such as overloading the machine or unevenly distributing the load, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the excessive vibration has caused cosmetic damage to the washing machine, such as paint peeling or scratches, the repair for purely aesthetic issues might not be included.
Issues Not Related to Vibration: If the service provider identifies other problems with the washing machine that are not directly related to the excessive vibration, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to the washing machine to reduce vibration beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service Technicians about any potential additional charges or exclusions before agreeing to the service.
Overfilling & UnderFilling
Service Includes
When a washing machine is overfilling or under filling with water, it indicates an issue with the water level control system. Here's what a "Overfilling or Under Filling of Water" service might typically include:
Inspection and Diagnosis: A qualified technician will inspect the washing machine to identify the cause of the water level problem. They will examine various components related to water intake and control.
Water Inlet Valve Check: The technician will inspect the water inlet valve, which is responsible for allowing water to enter the washing machine. If the valve is faulty or clogged, it may cause overfilling or under filling. The valve might need cleaning or replacement.
Water Level Pressure Switch Examination: The water level pressure switch is a component that monitors the water level in the washing machine. The technician will check this switch for proper functionality and calibration. If it's not working correctly, they may adjust or replace it.
Pressure Hose Inspection: The pressure switch is connected to a pressure hose that measures the water level. The technician will check this hose for clogs or damage, as any issues with it can lead to incorrect water level readings.
Drain Pump Check: A malfunctioning drain pump can cause water to drain too quickly, resulting in under filling. The technician will inspect the drain pump to ensure it's functioning correctly.
Water Inlet Filters Cleaning: The washing machine may have filters at the water inlet to catch debris and prevent clogging. The technician will clean these filters if necessary.
Control Board Examination: In some cases, the control board or electronic control unit (ECU) could be causing the water level problem. The technician will inspect the control board for any faults or errors.
Calibration and Adjustment: Depending on the findings of the inspection, the technician may calibrate or adjust the water level settings to ensure proper water intake.
Test Run: After performing the necessary repairs or adjustments, the technician will conduct a test run to check if the water level issue has been resolved.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine and the service Technicians practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer.
Service not included
Services that are not typically included in the standard "Washing machine overfilling or under filling of water" service content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement Parts: If the service requires the replacement of certain parts like the water inlet valve, pressure switch, pressure hose, drain pump, control board, or other components, the cost of these parts might not be included in the service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the overfilling or under filling issue is found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the water level issue may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the overfilling or under filling is a result of user error, such as selecting the wrong water level setting or obstructing the pressure hose, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the overfilling or under filling has caused cosmetic damage to the washing machine, such as water spills or paint peeling, the repair for purely aesthetic issues might not be included.
Issues Not Related to Water Level: If the service provider identifies other problems with the washing machine that are not directly related to the overfilling or under filling of water, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to improve water level control beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service Technicians about any potential additional charges or exclusions before agreeing to the service.
Water Drain Issue
Service Includes
When a washing machine is experiencing drainage issues with water, it typically indicates a problem with the draining system. Here's what a "Washing Machine Drainage Issue with Water" service might typically include:
Inspection and Diagnosis: A qualified technician will inspect the washing machine's drainage system to identify the cause of the issue. They will examine various components to pinpoint the problem accurately.
Drain Hose Examination: The technician will check the drain hose for any blockages, kinks, or damage. A clogged or bent drain hose can prevent proper water drainage and cause issues.
Drain Pump Check: The drain pump is responsible for pumping out the water from the washing machine during the drain cycle. The technician will inspect the pump for any clogs, debris, or malfunctions. They may clean or replace the pump if necessary.
Drain Filter Cleaning: Some washing machines have a drain filter that catches lint, debris, and other objects. The technician will clean the filter to ensure proper water flow.
Drainage System Clearance: The technician may also check the drainage system's plumbing and ensure there are no blockages in the household drainage pipes that may be causing the problem.
Siphoning Prevention: Siphoning occurs when the drain hose is positioned too low, causing water to flow back into the machine. The technician will ensure that the drain hose is correctly installed and positioned to prevent siphoning.
Electrical Components Inspection: If the washing machine has electronic control systems related to drainage, the technician will inspect these components for faults or errors.
Calibration and Adjustment: Depending on the findings of the inspection, the technician may calibrate or adjust the drainage settings to improve water flow.
Test Run: After performing the necessary repairs or adjustments, the technician will conduct a test run to check if the drainage issue has been resolved.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine and the service Technicians practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer.
Service not included
Services that are not typically included in the standard "Washing machine Drainage issue with water" service content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement Parts: If the service requires the replacement of certain parts like the drain hose, drain pump, drain filter, electronic control components, or other drainage-related parts, the cost of these parts might not be included in the service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the drainage issue is found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the drainage issue may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the drainage issue is a result of user error, such as improperly installing the drain hose or obstructing the drain filter, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the drainage issue has caused cosmetic damage to the washing machine or the surrounding area, the repair for purely aesthetic issues might not be included.
Issues Not Related to Drainage: If the service provider identifies other problems with the washing machine that are not directly related to the drainage issue, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to improve drainage beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service Technicians about any potential additional charges or exclusions before agreeing to the service.
Drain And Main Motor
Service Includes
When a washing machine has issues with the drain and main motors, a comprehensive service is required to diagnose and resolve the problems. Here's what a "Washing Machine Drain and Main Motors Service" might typically include:
Inspection and Diagnosis: A qualified technician will thoroughly inspect the washing machine's drain motor and main motor to identify any faults or issues.
Drain Motor Examination: The technician will check the drain motor for proper functionality. They will inspect the motor's wiring, connections, and components to ensure it is working correctly. If the drain motor is malfunctioning, they may attempt to repair it or recommend a replacement if necessary.
Main Motor Inspection: Similarly, the main motor will be inspected for any signs of damage, wear, or malfunction. The technician will test the motor to ensure it is operating as intended. Repairs or replacements will be performed as needed.
Motor Belt Check (If Applicable): If the washing machine uses a belt-driven motor system, the technician will inspect the motor belt for wear or damage. They may adjust or replace the belt if required.
Electrical Components Examination: The service will include a check of electrical components related to both motors, including switches, relays, and control boards. Any faulty components will be repaired or replaced.
Motor Calibration and Adjustment: Depending on the findings of the inspection, the technician may calibrate or adjust the motor settings to optimize performance and reduce strain on the motors.
Cleaning and Lubrication: The technician may clean and lubricate the motors and their moving parts to ensure smooth operation and extend their lifespan.
Test Run and Performance Check: After completing the repairs and adjustments, the technician will conduct a test run of the washing machine to verify that both the drain and main motors are functioning correctly.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine, as well as the service Technician's practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer. Always inquire about the scope of the service and any potential additional charges or exclusions before agreeing to the service.
Service not included
Services that are not typically included in the standard "Washing Machine Drain and Main Motors Service" content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement Parts: If the service requires the replacement of certain parts such as the drain motor, main motor, motor belt, electrical components, or other motor-related parts, the cost of these parts might not be included in the service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the motor issues are found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the motor issues may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the motor issues are a result of user error, such as overloading the machine or using it improperly, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the motor issues have caused cosmetic damage to the washing machine or the surrounding area, the repair for purely aesthetic issues might not be included.
Issues Not Related to Motors: If the service provider identifies other problems with the washing machine that are not directly related to the drain and main motors, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to improve motor performance or efficiency beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service provider about any potential additional charges or exclusions before agreeing to the service.
PCB Faulty
Service Includes
When the washing machine's PCB (Printed Circuit Board) is faulty, it can lead to various issues and malfunctions in the appliance. Here's what a "Washing Machine PCB is Faulty" service might typically include:
Diagnosis and Testing: A qualified technician will diagnose the washing machine to determine if the PCB is indeed faulty. They may use diagnostic tools and equipment to check for error codes and identify the specific problem.
PCB Inspection: The technician will visually inspect the PCB for any visible signs of damage, such as burnt marks, loose connections, or blown components.
PCB Component Testing: If possible, the technician may test individual components on the PCB to identify which ones are malfunctioning or damaged.
PCB Repair or Replacement: If the fault lies within the PCB and it is repairable, the technician will proceed with the necessary repairs. They may replace faulty components or solder broken connections. If the PCB is beyond repair, a replacement PCB may be required.
Testing After Repair: After repairing or replacing the PCB, the technician will conduct tests to ensure that the washing machine functions properly without any issues.
Firmware Updates (If Applicable): Some washing machine PCBs have firmware that controls the machine's operation. If necessary, the technician may update the firmware to the latest version.
Calibration and Adjustment: Depending on the washing machine's model and the PCB's complexity, the technician may need to calibrate or adjust settings to ensure optimal performance.
Safety Checks: The technician will perform safety checks to ensure that all electrical connections are secure and that there are no potential hazards.
Cleaning and Maintenance: As part of the service, the technician may clean the PCB and the surrounding area to remove dust and dirt that can affect its performance.
Test Run: After completing the repairs or replacements, the technician will conduct a test run of the washing machine to verify that the PCB-related issues have been resolved.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine, as well as the service Technicians's practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer. Always inquire about the scope of the service and any potential additional charges or exclusions before agreeing to the service.
Service not included
Services that are not typically included in the standard "Washing Machine PCB is Faulty" service content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement PCB: If the service requires a replacement PCB, the cost of the new PCB may not be included in the standard service. Customers may need to purchase it separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the issue is found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the faulty PCB may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the PCB is faulty due to user error, such as improper use or accidental damage, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the faulty PCB has caused cosmetic damage to the washing machine or the surrounding area, the repair for purely aesthetic issues might not be included.
Issues Not Related to PCB: If the service provider identifies other problems with the washing machine that are not directly related to the faulty PCB, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to improve the washing machine's performance or efficiency beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service Technician’s about any potential additional charges or exclusions before agreeing to the service.
Sensor Issue
Service Includes
When a washing machine has a sensor issue, it can lead to various problems and malfunctions in the appliance. Here's what a "Washing Machine Sensor Issue Service" might typically include:
Diagnosis and Testing: A qualified technician will diagnose the washing machine to identify the specific sensor that is malfunctioning. They may use diagnostic tools and equipment to check for error codes and sensor readings.
Sensor Inspection: The technician will visually inspect the sensors for any visible signs of damage, loose connections, or other issues.
Sensor Calibration and Adjustment: If the sensors are not providing accurate readings, the technician may calibrate or adjust them to ensure they function correctly.
Sensor Cleaning: In some cases, sensors may become dirty or obstructed, leading to inaccurate readings. The technician may clean the sensors to improve their performance.
Sensor Replacement: If a sensor is found to be faulty and cannot be repaired, the technician may replace it with a new sensor.
Electrical Component Check: The service will include checking the wiring and connections related to the sensors to ensure they are secure and free from defects.
Firmware Updates (If Applicable): Some washing machines have sensors that are controlled by firmware. If necessary, the technician may update the firmware to the latest version.
Safety Checks: The technician will perform safety checks to ensure that all electrical connections are secure and that there are no potential hazards related to the sensor issue.
Testing After Repair: After repairing or replacing the sensors, the technician will conduct tests to ensure that the washing machine functions properly without any sensor-related issues.
Calibration and Adjustment: Depending on the washing machine's model and the sensors' complexity, the technician may need to calibrate or adjust settings to ensure optimal sensor performance.
Cleaning and Maintenance: As part of the service, the technician may clean the washing machine's internal components and the surrounding area to remove dust and dirt that can affect sensor performance.
Please note that the specific details of the service may vary depending on the brand and model of the washing machine, as well as the service Technician's practices. Additionally, if the washing machine is still under warranty, some or all of the repairs or replacements mentioned above may be covered by the manufacturer. Always inquire about the scope of the service and any potential additional charges or exclusions before agreeing to the service.
Service not included
Services that are not typically included in the standard "Washing Machine Sensor Issue Service" content may vary depending on the service provider or warranty coverage. Here are some common exclusions:
Replacement Sensors: If the service requires the replacement of certain sensors, the cost of the new sensors may not be included in the standard service. Customers may need to purchase them separately.
Transportation or Home Visit Charges: Some service providers may charge an additional fee for transporting the washing machine to their service center or for a home visit by their technicians.
Diagnosis Fee: In some cases, there might be a diagnosis or inspection fee that customers have to pay, especially if the sensor issue is found to be caused by external factors or user error.
Out-of-Warranty Repairs: If the washing machine is no longer under warranty, the repair for the sensor issue may not be covered, and the customer will have to bear the full cost of the service.
User Error or Negligence: If the sensor issue is a result of user error, such as improper use or accidental damage, the repair may not be covered under warranty or the standard service.
Cosmetic Damage: If the sensor issue has caused cosmetic damage to the washing machine or the surrounding area, the repair for purely aesthetic issues might not be included.
Issues Not Related to Sensors: If the service provider identifies other problems with the washing machine that are not directly related to the sensor issue, these additional issues may not be covered in the standard service.
Modifications or Upgrades: If the customer requests additional modifications or upgrades to improve sensor performance or efficiency beyond the standard service, these enhancements may not be included in the service package.
It's essential for customers to review the terms and conditions of their warranty or service agreement to understand what is covered and what is not. Additionally, it's a good practice to ask the service Technician’s about any potential additional charges or exclusions before agreeing to the service.
OTHER WASHING MACHIN SERVICES
Service Includes
No Service Includes Present.
Service not included
No Service Not Includes Present.
